Symphonic VCR SL260D User Manual

OWNER’S  
MANUAL  
VIDEO CASSETTE  
RECORDER  
SL260D  
If you need additional  
operating assistance after  
reading this owner's manual  
or to order replacement  
accessories, please call  
TOLL FREE : 1-800-242-7158.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
WARNING:  
The lightning flash with arrowhead symbol, within  
CAUTION  
an equilateral triangle, is intended to alert the user  
to the presence of uninsulated "dangerous voltage"  
within the product's enclosure that may be of suffi-  
cient magnitude to constitute a risk of electric  
shock to persons.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of impor-  
tant operating and maintenance (servicing) instruc-  
tions in the literature accompanying the product.  
The caution marking is located on the rear of the cabinet.  
IMPORTANT SAFEGUARDS  
1. Read Instructions- All the safety and operating instructions should be  
read before the appliance is operated.  
FIGURE A  
ANTENNA  
LEAD  
WIRE  
2. Retain Instructions- The safety and operating instructions should be  
retained for future reference.  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
3. Heed Warnings- All warnings on the appliance and in the operating  
instructions should be adhered to.  
GROUND  
CLAMP  
4. Follow Instructions- All operating and use instructions should be followed.  
ANTENNA  
5.Cleaning- Unplug this video product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
EXCEPTION: A product that is meant for uninterrupted service and, that  
for some specific reason, such as the possibility of the loss of an authoriza-  
tion code for a CATV converter, is not intended to be unplugged by the  
user for cleaning or any other purpose, may exclude the reference to  
unplugging the appliance in the cleaning description otherwise required in  
item 5.  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
6. Attachments- Do not use attachments not recommended by the video  
14. Lightning- For added protection for this video product during a lightning  
storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system.  
This will prevent damage to the video product due to lightning and power-  
line surges.  
product manufacturer as they may cause hazards.  
7.Water and Moisture- Do not use this video product near water, for exam-  
ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet base-  
ment, or near a swimming pool, and the like.  
8. Accessories- Do not place this video product on an unstable cart, stand,  
tripod, bracket, or table.The video product may fall, causing serious injury  
to a child or adult, and serious damage to the appliance. Use only with a  
cart, stand, tripod, bracket, or table recommended by the  
manufacturer, or sold with the video product. Any mounting  
of the appliance should follow the manufacturer's instructions  
and should use a mounting accessory recommended by the  
manufacturer. An appliance and cart combination should be  
moved with care. Quick stops, excessive force, and uneven  
surfaces may cause the appliance and cart combination to  
overturn.  
9.Ventilation- Slots and openings in the cabinet are provided for ventilation  
and to ensure reliable operation of the video product and to protect it from  
overheating, and these openings must not be blocked or covered.The  
openings should never be blocked by placing the video product on a bed,  
sofa, rug, or other similar surface.This video product should not be placed  
in a built-in installation such as a bookcase or rack unless proper ventila-  
tion is provided or the manufacturer's instructions have been adhered to .  
15. Power Lines- An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or power circuits, or  
where it can fall into such power lines or circuits.When installing an outside  
antenna system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be fatal.  
16. Overloading- Do not overload wall outlets and extension cords as this can  
result in a risk of fire or electric shock.  
17. Object and Liquid Entry- Never push objects of any kind into this video  
product through any openings as they may touch dangerous voltage  
points or short-out parts that could result in a fire or electric shock. Never  
spill liquid of any kind on the video product.  
18. Servicing- Do not attempt to service this video product yourself as open-  
ing or removing covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
19. Damage Requiring Service- Unplug this video product from the wall out-  
let and refer servicing to qualified service personnel under the following  
conditions:  
10. Power Sources- This video product should be operated only from the  
type of power source indicated on the marking label. If you are not sure of  
the type of power supply to your home, consult your appliance dealer or  
local power company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization- This video product is equipped with a polar-  
ized alternating-current line plug (a plug having one blade wider than the  
other).This plug will fit into the power outlet only one way.This is a safety  
feature. If you are unable to insert the plug fully into the outlet, try reversing  
the plug. If the plug should still fail to fit, contact your electrician to replace  
your obsolete outlet. Do not defeat the safety purpose of the polarized  
plug.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the video product.  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the operating  
instructions as an improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician to  
restore the video product to its normal operation.  
e. If the video product has been dropped or damaged in any way.  
f. When the video product exhibits a distinct change in performance-this indi-  
cates a need for service.  
20. Replacement Parts- When replacement parts are required, be sure the  
service technician has used replacement parts specified by the manufac-  
turer or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock or other hazards.  
12. Power Cord Protection- Power supply cords should be routed so that  
they are not likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the appliance.  
21. Safety Check- Upon completion of any service or repairs to this video  
product, ask the service technician to perform safety checks to determine  
that the video product is in proper operating condition.  
22. Heat- This video product should be situated away from heat sources such  
as radiators, heat registers, stoves, or other products (including amplifiers)  
that produce heat.  
13. Outdoor Antenna Grounding- If an outside antenna or cable system is  
connected to the video product, be sure the antenna or cable system is  
grounded so as to provide some protection against voltage surges and  
built-up static charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with regard to proper grounding  
of the mast and supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and requirements for  
the grounding electrode. (Fig. A)  
– 1 –  
 
EN  
0VMN03300 / HD400UD #####  
PREPARATION FOR USE  
SETUP  
VCR to TV Connection  
Automatic Channel Set Up  
Disconnect the AC power cord of the TV from the AC  
outlet.  
You can automatically program the tuner to scan only the chan-  
nels you receive in your area.  
1
Channel memory programming is NOT needed when you con-  
nect the VCR to a cable box or satellite box as in "Connect VCR  
to TV Connection". In this case, select the VCR and TV to chan-  
nel 3 or 4 the same channel as the RF output channel of the  
VCR. Then, the channel you want to record or view may be  
selected at the cable box or satellite box.  
Follow the steps below once. Repeat it only if there is a power  
failure or if the VCR is unplugged for more than 30 seconds. (In  
these cases, the programmed channels are erased.)  
You must follow the steps below before attempting to play or  
record a video tape. If you want to play or record a video tape  
BEFORE programming the tuner, you can cancel it by pressing  
[C.RESET/EXIT].  
Disconnect the antenna or cable from the TV.  
2
3
4
5
Connect the antenna or cable to the ANT. IN jack of  
the VCR.  
Connect the VCR to the TV using the RF cable.  
Plug the AC power cords of the VCR and TV into the  
AC outlets.  
[VHF/UHF  
[Back of the VCR]  
[Indoor antenna]  
combination antenna]  
[Back of the  
UHF/VHF combination TV]  
ANT  
IN  
RF cable  
(supplied)  
OR  
OR  
UHF/VHF  
[Cable box or satellite box]  
You need to connect the antenna or cable to the VCR  
OUT  
IN  
OUT  
1
2
first. Then, connect the VCR power plug into a stan-  
dard AC outlet.  
From Cable or  
Satellite Company  
Turn on the TV and set the TV to channel 3. If channel 3  
is already occupied for broadcasting, change the RF output  
to CH 4, and change the TV channel to CH4.  
RF Output Channel  
If your TV does not have A/V terminals:  
Press [PLAY] on the VCR for 3 seconds during playback.The RF  
output channel will change to CH4 from CH3.  
(See RF Output Channelon page 3 for the detail.)  
Turn on the VCR by pressing [POWER]. When the  
POWER is on, both the POWER and VCR/TV indicator on  
the VCR will be on.  
When you want to return to CH3 for RF output channel, press  
[PLAY] on the VCR for 3 seconds during playback again. (Default  
setting :CH3)  
3
4
There is case that the RF output channel does not change by sit-  
uation (For example, when you adjust tracking using  
Select the On Screen Language  
LANGUAGE SELECT  
("ENGLISH" , "FRANCAIS" or  
(
)
[CHANNEL  
].  
ENGLISH  
"ESPAÑOL") by pressing [PLAY] or  
FRANCAIS  
In this case, stop the playback, and start the playback again.  
After that, press [PLAY] on the VCR for 3 seconds.  
If there is a power failure or the VCR is unplugged for more  
than 30 seconds, the RF output channel setting will return to  
CH3.  
[STOP]. Then, press [F.FWD].  
Begin channel preset by pressing [F.FWD] once. The  
5
tuner scans and memorizes all active  
channels in your area.  
CH 01  
The VCR distinguishes between standard  
VCR to AV TV connection using AUDIO/VIDEO Cables  
AUTO SET UP  
TV channels and cable channels.  
Using Optional AUDIO/ VIDEO Output Jacks  
With this connection, you can get better pictures and sounds  
when playing back a tape if your TV has A/V Input jacks. Please  
refer to your TVs owners manual.  
Using AUDIO/VIDEO Input Jacks  
You can use the A/V input jacks on the front or the back of  
the VCR.  
After scanning, the tuner stops on the lowest memo-  
rized channel. The TV screen returns to TV mode.  
If "AUTO SET UP" appears on the TV screen again, check  
the cable connections. Press [F.FWD] once again and the  
VCR will begin preset again.  
6
To Select a Desired Channel  
To use the input jacks on the back of the VCR, select "L1" posi-  
tion by pressing [0], [0], [1] on the remote control or  
(
)
You can select the desired channel by using [CHANNEL  
or directly pressing [Number] on the remote control.  
Note for using the Number buttons:  
]
(
)
[CHANNEL  
].  
To use the input jacks on the front of the VCR, select "L2" posi-  
When selecting cable channels which are higher than 99,  
enter channel numbers as a three-digit number.(For example:  
117, press 1,1,7)  
You must precede single-digit channel numbers with a zero  
(For example: 02, 03, 04 and so on).  
tion by pressing [0], [0], [2] on the remote control or  
(
)
[CHANNEL  
].  
L1or L2is found before the lowest memorized channel.  
(Example: CH2)  
To Preset the Channel Again  
[Playing VCR]  
AUDIO  
L
Press [MENU] until the main menu appears.  
1
OUT  
IN  
IN  
R
VIDEO  
Audio/Video cables  
(not supplied)  
Select "CHANNEL SET UP" by pressing [PLAY] or  
[STOP]. Then, press [F.FWD].  
OUT  
2
3
[TV A/V]  
Select "AUTO SET UP" by pressing [PLAY] or [STOP].  
Then, press [F.FWD]. After scanning, the tuner stops on  
the lowest memorized channel.  
IN  
L
R
AUDIO  
VIDEO  
3 –  
 
EN  
To Add/Delete Channels  
PLAYBACK FUNCTION  
Normal Playback  
When the VCR automatically program the tuner to scan only the  
channels you receive in your area, some channels may be  
skipped due to weak signal. You can manually add the channel  
in the VCR memory.  
Insert the prerecorded tape. The VCR will  
1
turn on. If the safety tab has been removed,  
the VCR will start playback automatically.  
- MENU -  
Press [MENU] until the main menu  
TIMER PROGRAMMING  
[OFF]  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
1
2
appears.  
Turn on the TV and set the TV to channel 3. If channel  
3 is already occupied for broadcasting, change the RF out-  
put to CH 4, and change the TV channel to CH4.  
(See RF Output Channelon page 3 for the detail.)  
LANGUAGE SELECT  
AUDIO OUT  
Select "CHANNEL SET UP" by  
pressing [PLAY] or [STOP]. Then,  
press [F.FWD].  
[ON]  
TV STEREO  
SAP  
2
Select "MANUAL SET UP" by pressing [PLAY] or  
Begin playback by pressing [PLAY].  
3
4
5
[STOP]. Then, press [F.FWD].  
3
Tracking adjustment will be set automatically (Digital  
Tracking function) when you start playback. To adjust the  
Enter the desired channel number by pressing [PLAY]  
or [STOP].  
(
)
tracking manually, press [CHANNEL  
You cannot manually adjust the tracking of a Still picture.  
However, you may press [CHANNEL  
remove vertical jitter in a Still picture.  
When a tape has reached the end, the VCR will rewind the  
] on the VCR.  
Add or Delete it from memory by pressing [F.FWD] or  
[REW] so that "ADD" or "DELETE" flashes on the TV  
screen accordingly.  
(
)
] on the VCR to  
Exit the Preset mode by pressing [C.RESET/EXIT].  
tape to the beginning, eject the tape, and turn off the VCR  
6
4 automatically.  
To Change the On-Screen Language  
To stop playback, press [STOP].  
Press [MENU] until the main menu appears.  
1
2
3
Counter Reset  
Select "LANGUAGE SELECT" by pressing [PLAY] or  
[STOP]. Then, press [F.FWD].  
You can reset the counter by pressing [C.RESET/EXIT] on the  
remote control  
Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by  
pressing [PLAY] or [STOP]. Then, press  
[C.RESET/EXIT].  
Still / Slow  
You can freeze the picture on TV screen by pressing  
[PAUSE/STILL] during playback.  
You can advance the picture by one frame at a time by press-  
ing [PAUSE/STILL] during the still mode.  
If the picture begins to vibrate vertically during the still mode,  
If you accidentally select Spanish or French and need  
English: Press [MENU] and choose SELEC. IDIOMA, or  
SELECTION LANGUE. Press [F.FWD], and select ENG-  
LISH. Finally, press [C.RESET/EXIT].  
(
)
stabilize the picture by pressing [CHANNEL  
].  
If the picture is distorted or rolling vertically, adjust the vertical  
hold control on your TV, if equipped.  
You can see the slow motion by pressing [SLOW] during play-  
back or the still mode.  
Clock Set Up  
Select main menu by pressing [MENU].(If the clock is not  
1
set, the CLOCK SET menu appears first. In this case, fol-  
low step [3].)  
If the noise bar appears on the TV screen, you can reduce it  
(
)
by pressing [CHANNEL  
].  
After the VCR has been in Still/Slow mode for 5 minutes, it will  
stop automatically to protect the tape and the video head from  
damage.  
Select "CLOCK SET" by pressing [PLAY] or [STOP].  
Then, press [F.FWD].  
2
3
Set the clock.  
To return playback, press [PLAY].  
Auto Repeat Playback  
Set the month Press [PLAY] or [STOP] repeatedly.  
Then, press [F.FWD].  
This feature allows you to play a tape over and over.  
Select main menu by pressing [MENU].  
1
Set the day  
Press [PLAY] or [STOP]repeatedly.  
Then, press [F.FWD].  
Set the year  
Press [PLAY] or [STOP] repeatedly.  
Then, press [F.FWD].  
The day of the week will appear automatically.  
Press [PLAY] or [STOP] repeatedly.  
Then, press [F.FWD].  
Press [PLAY] or [STOP] repeatedly.  
Then, press [F.FWD].  
Select "AUTO REPEAT" by pressing [PLAY] or [STOP].  
2
3
Begin auto repeat playback by pressing [F.FWD] so that  
Set the hour  
[ON] appears next to "AUTO REPEAT".  
If the on-screen menu still remains, press [C.RESET/EXIT]  
to exit the menu.  
Set the minute  
To cancel the Auto repeat mode, press [F.FWD] at step [3]  
so that [OFF] appears next to "AUTO REPEAT".  
Press [PLAY] or [STOP]  
repeatedly.  
Set the AM  
or PM  
CLOCK SET  
MONTH DAY  
YEAR  
03 17 MON 2003  
/
Search Functions  
HOUR MINUTE AM/PM  
05  
:
40  
PM AM  
PM  
Picture Search  
If you want to skip or repeat a scene during playback, press  
[F.FWD] or [REW].  
Press it again and the VCR will now search in super high  
speed. (in the LP/SLP modes only)  
To go back one step, press [REW].  
Start the clock by pressing [C.RESET/EXIT] or [F.FWD].  
4
4 –  
EN  
 
Index Search  
OTR (One Touch Recording)  
An index mark will be assigned at the beginning of each record-  
ings you make. You may skip to a specific marked point by fol-  
lowing the steps below.  
This feature allows you to set the recording length simply by  
pressing [REC/OTR] on the VCR.  
Begin OTR by pressing [REC/OTR] on the VCR repeat-  
Press [SEARCH-MODE] so that the Index Search menu  
1
edly until the desired recording length appears.  
1
2
appears.  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
Enter the number of recordings you  
wish to skip by pressing [PLAY] or  
[STOP] within 30 seconds.  
INDEX SEARCH  
03  
OTR(8:00)  
OTR(7:30)  
TIMER RECORDING  
You may set the VCR to start recording while you are away. You  
can set eight programs to record on specific days, daily or week-  
ly within a 1 year period.  
Press [F.FWD] or [REW] to start index search. If you  
want to go in the forward direction, press [F.FWD]. If you  
want to go in the reverse direction, press [REW].  
After index search, the VCR will play the tape automati-  
cally.  
3
Insert a tape with its safety tab into the VCR.  
1
Time Search  
Select main menu by pressing [MENU].  
2
This feature allows you to go to a specific point on a tape by  
entering the exact amount of time you wish to skip in order to  
reach the point.  
Select "TIMER PROGRAMMING" by pressing [PLAY] or  
[STOP]. Then, press [F.FWD].  
3
Press [SEARCH-MODE] so that the Time Search menu  
If you have not yet set the clock, "CLOCK SET" appears. If  
1
2
3
appears.  
so, continue with the step [3] in "CLOCK SET UP" section.  
TIME SEARCH  
2 : 50  
4Then, set the timer recording.  
Enter your desired time to skip by  
pressing [PLAY] or [STOP] within 30 seconds.  
Set the timer.  
Press [F.FWD] or [REW] to start time search. If you want  
to go in the forward direction, press [F.FWD]. If you want  
to go in the reverse direction, press [REW].  
After time search, the VCR will play the tape automati-  
cally.  
Set the program number (1~8)  
PROGRAM NUMBER  
4
DATE  
- - / - -  
Program number which is not set up flashes.  
Press [PLAY] or [STOP] repeatedly for the  
desired program number.Then, press [F.FWD].  
START TIME - - : - - - -  
END TIME - - : - - - -  
CHANNEL - -  
REC SPEED - -  
Select once, daily or weekly recording  
RECORDING FUNCTION  
It may be unlawful to record play back copyrighted material with-  
out the consent of the copyright owner.  
For once: Press [PLAY] or [STOP] to point to "ONCE".  
For daily (Monday~Friday): Press [PLAY] or  
PROGRAM NUMBER  
ONCE  
4
[STOP] to point to "DAILY".  
For weekly: Press [PLAY] or [STOP] to point to  
DAILY  
WEEKLY  
Accidental erasure prevention  
"WEEKLY".  
Then, press [F.FWD]  
To prevent accidental recording on a recorded  
cassette, remove its record safety tab. To  
.
Set the date  
record on it later, cover the hole with cello-  
Record safety tab  
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].  
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].  
phane tape.  
Before recording, make sure:  
The desired channel is selected by pressing [Number] on  
Set the start time  
(
)
the remote control or the [CHANNEL  
]. (If you con-  
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].  
nected the VCR to a cable box or satellite box as in "VCR  
to TV Connection" on page 3, select the VCR to channel  
3 or 4 the same channel as the RF output channel of the  
VCR. Then, select the channel you want to record at the  
cable box or satellite box. In this case, you can ONLY  
record and view the SAME channel. )  
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]  
.
.
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD]  
Set the end time  
Follow the instructions of "Set the start time" to set the end time.  
Set the channel number  
Press [PLAY] or [STOP] repeatedly for the desired channel number.  
Then, press [F.FWD].  
If you connected the VCR to a cable box or satellite box as in "Connect  
VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel  
as RF output channel of the VCR.  
Then, select the channel you want to record at the cable box or satellite box.  
Leave the cable box or satellite box on for timer recording.  
There is a tape with its safety tab into the VCR.  
The desired recording speed is selected in SP(standard play) or  
SLP(super long play) mode by pressing [SPEED] on the remote  
control.  
TV STEREO or SAP is selected.  
Tape Speed  
Recording/Playback Time  
Type of tape  
SP mode  
SLP mode  
T60  
1hour  
3hour  
T120  
2hours  
6hour  
T160  
2-2/3hours  
8hour  
ONE TIME PROGRAM  
Set the tape speed  
PROGRAM NUMBER  
DATE 05/12 MON  
START TIME 07:30 PM  
END TIME 08:30 PM  
4
Press [PLAY] or [STOP] repeatedly for the  
desired tape speed.  
Then, press [F.FWD].  
CHANNEL  
16  
REC SPEED SP  
SP  
Viewing and Recording the Same Program  
SLP  
Begin the recording by pressing [RECORD].  
To go back one step, press [REW].  
1
2
To temporarily stop recording or resume it, press  
[PAUSE/STILL]. After the VCR has been in Pause mode for  
5 minutes, it will stop automatically to protect the tape and  
the video head from damage.  
To set another program, repeat step [4]. To exit, press  
[C.RESET/EXIT].  
5
6
Press [POWER] to set the timer. The TIMER indicator on  
the VCR comes on. TIMER RECORDING WILL NOT BE  
ACTIVATED UNLESS YOU TURN THE VCR OFF.  
Press [STOP] when recording is completed.  
5 –  
EN  
 
For best results during dubbing, use the VCRs front panel  
controls whenever possible. The remote control might affect  
the playing VCRs operation.  
Always use video-quality shielded cables with RCA-type con-  
nectors. Standard audio cables are not recommended.  
You can use a video disc player, satellite receiver, or other  
audio/video component with A/V outputs in place of the play-  
ing VCR.  
Hints for Timer Recording  
If there is a power failure or the VCR is unplugged for more  
than 30 seconds, the clock setting and all timer settings will be  
lost.  
If the tape runs out before the end time, the VCR will switch to  
the Stop mode immediately, eject the tape and the VCR power  
will be turned off. The TIMER indicator will flash.  
If a tape is not in the VCR or does not have the safety tab, the  
TIMER indicator flashes and timer recording cannot be per-  
formed. Please insert a recordable tape.  
To Monitor the Recording  
To Stop an Automatic Timer Program already started  
Turn on the TV and set the TV to channel 3. If channel 3  
Press [STOP/EJECT] on the VCR.  
1
is already occupied for broadcasting, change the RF output  
to CH 4, and change the TV channel to CH4.  
(See RF Output Channelon page 3 for the detail.)  
To Check, Correct, or Cancel an Automatic Timer Program  
Turn the power on by pressing [POWER].  
Press [VCR/TV] on the remote control of the recording  
VCR so that the VCR/TV indicator comes on.  
1
2
Select main menu by pressing [MENU].  
Sound) System  
MTS (Multi-Channel Television  
2
When you play a VHS tape, or receive a  
broadcast on the VCR tuner channel  
you are watching, the status shown  
below will appear when you press [DIS-  
PLAY] on the remote control. When you  
record the MTS broadcast signal, you  
need setting the MTS mode.  
Select "TIMER PROGRAMMING" by pressing [PLAY] or  
[STOP]. Then, press [F.FWD].  
STOP  
12:00AM  
CH 32  
STEREO  
SAP  
3
4
1)  
2)  
Select the program number which you want to check  
by pressing [PLAY] or [STOP]. The details of the selected  
program appears on the TV screen.  
SP  
0:00:00  
HIFI  
Go to the digit you want to change by pressing [F.FWD] or  
[REW]. Then, enter correct numbers by pressing [PLAY] or  
[STOP].  
Press [MENU] and select "TV STEREO" or "SAP" by  
pressing [PLAY] or [STOP]. Then, press [F.FWD] for fix  
mode. To exit, press [C.RESET/EXIT].  
1
You may cancel the entire program by pressing [REW] dur-  
5 ing the program number flashes.  
Although a program may be broadcast in both stereo and  
second audio, you must select the Recording mode in TV  
STEREO or SAP before you record a broadcast.  
Press [MENU] and select "AUDIO OUT" by pressing  
[PLAY] or [STOP]. Then, press [F.FWD]. Next, select  
"HIFI" or "MONO" by pressing [PLAY] or [STOP]. To  
exit, press [C.RESET/EXIT].  
While the VCR is set in HIFI stereo mode, HIFI appears on  
the TV screen. While the VCR is set in monaural (MONO)  
mode, HIFI disappears from the TV screen.  
Press [C.RESET/EXIT] to exit.  
Press [POWER] to return to timer stand-by mode.  
6
2
SPECIAL FEATURES  
Copying a Video Tape  
You can make copies of video tapes made by friends or relatives  
for your enjoyment.  
Warning: Unauthorized recordings of copyrighted video tapes  
may be an infringement of copyright laws.  
Connect the recording VCR(this unit), the playing VCR (another  
source) and your TV using the following diagram.  
MTS Recording / Monitor Mode  
Type of Display on the STEREO/SAP  
broadcast TV screen  
Hi-Fi audio track  
(2-channel)  
Normal audio  
track  
Selection  
L-channel R-channel  
Regular  
-None-  
-Invalid-  
Mono  
(monaural audio)  
Mono  
Mono  
[Recording VCR]  
Stereo  
[TV set]  
Audio/Video cables  
(not supplied)  
STEREO  
broadcast  
-Invalid-  
TV STEREO*  
SAP*  
L
R
L+R  
(this unit)  
(Use for monitoring)  
Main audio Main audio Main audio  
program program program  
Sub audio Sub audio Sub audio  
program  
Bilingual  
broadcast  
ANT  
AUDIO  
SAP  
IN  
L
RF cable  
(supplied)  
OUT  
IN  
OUT  
program  
program  
LEFT RIGHT  
R
IN  
VIDEO  
OUT  
AUDIO  
VIDEO  
TV STEREO*  
SAP*  
L
R
L+R  
ANT in  
Stereo &  
STEREO  
Bilingual  
SAP  
OUT  
IN  
Sub audio Sub audio Sub audio  
program program program  
[Playing VCR]  
(another source)  
broadcast  
* You must select the recording mode in TV STEREO or SAP before you record a broadcast.  
Insert a pre-recorded tape into the playing VCR.  
Auto Rewind  
1
2
3
4
5
6
When a tape has reached the end during recording, playback,  
or fast-forward, the tape will automatically rewind to the begin-  
ning. After rewinding finishes, the VCR will eject the tape and  
turn itself to off.  
The VCR will not rewind the tape automatically during timer  
recording or One Touch Recording.  
Insert a tape with its safety tab into the recording  
VCR.  
Press [SPEED] on the remote control of the recording  
VCR to select the desired recording speed (SP/SLP).  
Select the L1or L2position on the recording VCR.  
See page 3, under Using AUDIO/VIDEO Input Jacks.  
Real Time Tape Counter  
This shows the elapsed recording or playback time in hours,  
minutes, and seconds. (The displayed time will not change dur-  
ing blank portions on the tape.)  
The indication will appear when the tape is rewound further  
than 0:00:00on the tape counter.  
Press [REC/OTR] on the recording VCR.  
Begin playback of the tape in the playing VCR.  
6 –  
 
EN  
TROUBLESHOOTING GUIDE  
If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the  
left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.  
PROBLEM  
No power.  
CORRECTIVE ACTION  
Make sure the power plug is connected to an AC outlet.  
Make sure the power is turned on.  
Timer recording is impossible. Make sure the timer recording is set correctly.  
Make sure the power is off.  
Make sure the VCR clock is set correctly.  
Cannot go into Record mode. Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.  
(
)
Playback picture is partially noisy. Adjust tracking control for a better picture by pressing [CHANNEL  
] on the VCR.  
Cannot view a tape but the  
Head cleaning may be necessary. Refer to AUTO HEAD CLEANING.  
Make sure the VCR is not in the Menu mode.  
Turn on the TV and set the TV to channel 3. If channel 3 is already occupied for broad-  
casting, change the RF output to CH 4, and change the TV channel to CH4.  
(See RF Output Channelon page 3 for the detail.)  
.
audio is OK  
No or poor playback picture.  
Fine tune your TV.  
TV programs cannot be seen Re-check the ANT. IN and ANT. OUT connections. See page 3.  
normally.  
Press [VCR/TV] on the remote control so that the VCR/TV indicator on the VCR disap-  
pears.  
No VCR operation from the  
infrared Remote Control.  
Make sure the power plug is connected to an AC outlet.  
Check batteries in remote control.  
Video or color fades in and out You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
when making a copy of a video tape.  
SPECIFICATIONS  
Operating temperature :  
Converter output :  
41°F~104°F (5°C~40°C)  
VHF Channel 3 or 4.  
120V, 60Hz  
Dimensions :  
Weight :  
W 14-1/4(360mm)  
H 3-5/8(92mm)  
D 8-1/2(216mm)  
Power requirement :  
Power consumption :  
14 Watts  
4.0 lbs. (1.8 Kg.) (approx.)  
Supplied Accessories  
RF Cable  
Remote control  
Two AA batteries  
(NA311UD/NA361UD)  
Designs and specifications are subject to change without notice and legal obligation.  
If there is a discrepancy between languages, the default language will be English.  
MAINTENANCE  
Servicing  
Auto Head Cleaning  
Should your VCR become inoperative, do not try to correct  
the problem by yourself. There are no user-serviceable parts  
inside. Turn off, unplug the power plug, and please call our  
Automatically cleans video heads as you insert or remove a  
cassette, so you can see a clear picture.  
Playback picture may become blurred or interrupted while  
the TV program reception is clear. Dirt accumulated on the  
video heads after long periods of use, or the usage of rental  
or worn tapes can cause this problem. If a streaky or snowy  
picture appears during playback, the video heads in your  
VCR may need to be cleaned.  
h1el-p8lin0e 0at -242-7158,  
to locate an Authorized Service Center.  
Cabinet Cleaning  
1. Please visit your local Audio/Video store and purchase a  
good quality VHS Video Head Cleaner.  
Wipe the front panel and other exterior surfaces of the VCR  
with a soft cloth immersed in lukewarm water and wrung dry.  
Never use a solvent or alcohol. Do not spray insecticide liq-  
uid near the VCR. Such chemicals may cause damage and  
discoloration to the exposed surfaces.  
2. If a Video Head Cleaner does not solve the problem,  
please call our help line at 1-800-242-7158, to locate an  
Authorized Service Center.  
NOTES:  
Remember to read the instructions included with the video  
head cleaner before use.  
Clean video heads only when problems occur.  
7 –  
 
EN  
CONTROLES DE FUNCIONAMIENTO Y FUNCIONES  
Mando a distancia  
Panel frontal  
Indicadores  
1. Botón de expulsión (EJECT)  
1. Compartimiento del videocasete  
2. Botón de avance rápido  
3. Botón de reproducción  
14. Indicador de alimentación  
2. Botones de número (NUMBER)  
15. Indicador de videograbadora/televisor  
16. Indicador de videocasete introducido  
17. Indicador del temporizador  
3. Botón de menús (MENU)  
4. Botón de grabación (RECORD)  
4. Botón de rebobinado  
5. Botón de velocidad (SPEED)  
5. Botón de parada/expulsión  
6. Botón de grabación con un toque  
7. Botón de menús  
18. Indicador de grabación  
6. Botón de rebobinado (REW)  
Panel trasero  
7. Botón de parada (STOP)  
8. Botón de reproducción (PLAY)  
8. Indicadores  
19. Terminal de salida de audio  
20. Terminal de entrada de audio  
21. Terminal de entrada de antena  
22. Terminal de salida de antena  
23. Terminal de entrada de vídeo  
24. Terminal de salida de vídeo  
25. Cable de alimentación  
9. Botón de avance rápido (F.FWD)  
10. Botón de visualizador (DISPLAY)  
11. Botón de pausa/imagen fija (PAUSE/STILL)  
12. Botón de cámara lenta (SLOW)  
13. Botón de c.reposición/salida (C.RESET/EXIT)  
14. Botón del modo de búsqueda (SEARCH-MODE)  
15. Botones de selección de canales (CHANNEL)  
16. Botón de la alimentación (POWER)  
17. Botón de videograbadora/televisor (VCR/TV)  
9. Sensor de control remoto  
10. Botones de selección de canales  
11. Botón de la alimentación  
12. Terminal de entrada de audio  
13. Terminal de entrada de vídeo  
PREPARACIÓN DE CANALES  
PREPARACIÓN DEL RELOJ  
(La antena o la caja de televisión por cable  
1. Pulse [MENU] hasta que aparezca el menú principal. (Si el  
reloj no está puesto en hora y se pulsa [MENU], el menú  
AJUSTE DE RELOJ aparece en primer lugar. En este  
caso, siga el paso 3.)  
2. Pulse [PLAY] o [STOP] para indicar a "AJUSTE DE  
RELOJ". Luego, pulse [F.FWD].  
deberá estar conectada)  
NOTA: Cuando utilice su nueva videograbadora por primera  
vez, o en el caso de ser necesario después de producirse un  
fallo en la alimentación, la videograbadora se pondrá inicial-  
mente en el modo de preajuste cuando se pulse [POWER].  
3.  
1. Encienda el televisor y ponga el televisor en el canal 3.  
2. Pulse [POWER] para encender la videograbadora.  
3. Seleccione "ENGLISH" , "FRANCAIS"(French) o  
"ESPAÑOL" (Spanish) pulsando [PLAY] o [STOP]. Y  
luego pulse [F.FWD].  
Pulse repetidamente [PLAY] o [STOP].  
Ajuste el mes.  
Luego, pulse [F.FWD].  
Ajuste el día.  
Ajuste el año.  
Ajuste la ora.  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
4. Pulse una vez [F.FWD].  
Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
El sintonizador explora y memoriza  
todos los canales activos de su zona.  
Tras la exploración, el sintonizador se  
detiene en el canal memorizado más  
bajo.  
Ajuste el minuto. Pulse repetidamente [PLAY] o [STOP].  
Luego, pulse [F.FWD].  
Ajuste la  
Pulse repetidamente [PLAY] o [STOP].  
mañana (AM) o  
la tarde (PM).  
AJUSTE DE RELOJ  
MES  
03  
DIA  
AÑO  
/
17 LUN 2003  
HORA MINUTO AM/PM  
Para volver atrás un paso, pulse [REW].  
4. Pulse [C.RESET/EXIT] o [F.FWD] para  
poner en funcionamiento el reloj.  
05  
:
40  
PM AM  
PM  
FUNAI CORPORATION LIMITED WARRANTY  
Funai Corporation will exchange or repair this product, at its option, in the  
event of defect in materials or workmanship as follows:  
EXCHANGE DURATION:  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY  
ACCESSORIES (EXCEPT REMOTE CONTROL UNITS), ANY COSMETIC  
PARTS, COMPLETE ASSEMBLY PARTS, DEMONSTRATION OR FLOOR  
MODELS.  
1-90 DAYS:  
FUNAI CORPORATION will exchange for a new unit with-  
out charge for a period of ninety (90) days from the date of  
original retail purchase.  
FUNAI CORPORATION will exchange for a factory-ser-  
vice-to-new-condition unit for a charge of a retailed price  
unit for the period of ninety one (91) days to three hun-  
dred sixty five (365) days from the date of original retail  
purchase.  
FUNAI CORPORATION AND ITS REPRESENTATIVES OR AGENTS SHALL  
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSE-  
QUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE  
OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS  
MADE IN LIEU OF ALL OTHER WARRANTIES INCLUDING THE WARRAN-  
TY OF MERCHANT ABILITY, AND FITNESS FOR A PARTICULAR PUR-  
POSE, THAT ARE HEREBY DISCLAIMED BY FUNAI CORPORATION AND  
ITS REPRESENTATIVES OR AGENTS IN THE UNITED STATES.  
91-365 DAYS:  
REPAIR DURATION:  
LABOR:  
FUNAI CORPORATION will provide the labor without  
charge for a period of ninety (90) days from the date of  
original retail purchase.  
FUNAI CORPORATION will provide parts to replace  
defective parts without charge for a period of one (1) year  
from the date of original retail purchase. Certain parts  
are excluded from this warranty.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED  
BY A FUNAI AUTHORIZED CENTER. THIS WARRANTY IS VALID WHEN  
THE PRODUCT IS DELIVERED PREPAID TO A FUNAI AUTHORIZED  
SERVICE FACILITY.  
PARTS:  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU  
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF AT  
ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO  
OBTAIN SATISFACTION WITH THE EXCHANGE OR REPAIR OF THIS  
PRODUCT, PLEASE CONTACT FUNAI CORPORATION.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PUR-  
CHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL  
RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-  
UCT TO OBTAIN EXCHANGE OR SERVICE UNDER THIS WARRANTY  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product  
are altered, replaced, defaced or missing. This FUNAI CORPORATION  
Limited warranty applies only to product purchased and used in the United  
States.  
This warranty only covers failures due to defects in material or workmanship,  
which occur during normal use. It does not cover damage which occurs in  
shipment, or failures which are caused by repairs, alterations, or parts not  
supplied by FUNAI CORPORATION, or damage which results from accident,  
misuse, abuse, mishandling, misapplication, alteration, faulty installation,  
improper maintenance, commercial use such as hotel, rental or office use of  
this product, or damage which results from fire, flood, lightning or other acts  
of God.  
ATTENTION:  
FUNAI CORPORATION RESERVES THE RIGHT TO MODIFY  
ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR  
NOTICE.  
For information about your product, or for information on how  
to exchange or repair your product, telephone or write to the  
following:  
FUNAI CORPORATION  
Customer Service  
100 North Street; Teterboro, NJ 07608  
Telephone (800)242-7158  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
8 –  
 
EN  
Printed in China  

Soleus Air Dehumidifier GL DEH 70P 2 User Manual
Sony Camcorder Accessories SPK PC3 User Manual
Sony DVD VCR Combo 129 User Manual
Sony Kitchen Entertainment Center PCV R532DS User Manual
Sony Personal Computer PCV LX800 User Manual
Sony Projector PL CX125 User Manual
SOYO Computer Hardware SY 7VMA B User Manual
Spalding Fitness Equipment M88724C1 User Manual
StarTechcom Switch vs123HD User Manual
Sylvania DVD Player DVL700D User Manual