NEX-3/5/5C/C3
NEX-VG10/VG10E
The new functions provided by this firmware update and their respective
operations are described here.
Please refer to the Instruction Manual of your camera/camcorder and LA-EA2
Mount Adaptor, and the Handbook contained on the supplied CD-ROM.
© 2011 Sony Corporation
4-420-526-12(1)
•
Aperture is set to F3.5 when you record movies with autofocusing. When you are using a lens with an
F3.5 or smaller F-stop, aperture is set to the maximum F-stop of the lens. When you want to set your own
value for aperture to record movies, select [Aperture Priority] or [Manual Exposure] in [Shoot Mode],
and select manual focusing. If you change the aperture while recording a movie, the noise may be heard
or the screen may become brighter while the camcorder is processing the adjustment.
New functions provided in the menu
The following functions will be added to the menu by this firmware upgrade.
Menu
New items
Functions
Camera
Autofocus Area
Allows you to set a position for phase-
detection AF, when the LA-EA2 Mount
Adaptor is attached.
Setup
AF micro adjustment (AF Allows you to adjust the autofocused
Micro Adj./amount/Clear) position finely, when the LA-EA2 Mount
Adaptor is attached.
Peaking (Peaking Level/
Peaking Color) (NEX-
VG10/VG10E only)
Enhances the outline of in-focus ranges
with a specific color in manual focus.
• The peaking function is provided for NEX-3/5/5C/C3 in the previous firmware
version. Refer to the corresponding Instruction Manual on the operation and setting.
NEX-3/5/5C: Instruction Manual of Ver. 04
NEX-C3: Ver. 01 (Instruction Manual supplied with the camera)
3GB
Autofocus Area
Allows you to set a position for phase-detection AF, when using an A-mount lens with
the LA-EA2 Mount Adaptor (sold separately). You can only set the position for phase-
detection AF when an A-mount lens with the LA-EA2 Mount Adaptor is attached.
1 [Menu] t [Camera] t [Autofocus Area] t desired mode.
(Wide)
(Spot)
(Local)
The camera determines which of the 15 AF areas is used for
focusing.
The camera uses the AF area located in the center area
exclusively.
Allows you to choose the area for which you want to activate
the focus from among 15 AF areas with the control wheel
(NEX-3/5/5C/C3) or the v/V/b/B buttons (NEX-VG10/
VG10E).
4GB
AF Micro Adj./amount/Clear
Allows you to adjust and register an autofocused position for each lens, when using an
A-mount lens with the LA-EA2 Mount Adaptor (sold separately).
1 [Menu] t [Setup] t [AF Micro Adj.] t [On].
2 [Menu] t [Setup] t [amount] t desired value t OK.
AF Micro Adj.
amount
Sets whether or not to use the [AF Micro Adj.] function. Select [On] to
use it. (The default setting is [Off].)
Allows you to select an optimum value between –20 and +20.
Selecting a larger value shifts the autofocused position away from the
camera. Selecting a smaller value shifts the autofocused position
closer to the camera.
Clear
Clears the value you set.
Notes
•
•
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered value appears on the
screen. [ 0] appears for lens for which a value has yet to be registered.
If [–] appears, more than 30 lenses have been registered. If you want to register another lens, you must
first clear a value. Attach a lens of the value to be cleared and select [ 0]. If you want to clear all
registered values, select [Clear].
•
•
•
Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.]
with other brands of lenses, the registered value may be affected.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konika-Minolta lens of the same
specification.
5GB
Peaking Level (NEX-VG10/VG10E
only)
Enhances the outline of in-focus ranges with a specific color in manual focus. This
function allows you to confirm the focus easily.
1 MENU t [Setup] t [Peaking Level] t desired setting.
High
Mid
Low
Off
Sets the peaking level to high.
Sets the peaking level to middle.
Sets the peaking level to low.
Does not use the peaking function.
Notes
•
Since the camcorder judges that sharp areas are in focus, the peaking level is different, depending on the
subject, shooting situation, or on the lens used.
•
The outline of in-focus ranges is not enhanced when the camcorder is connected using an HDMI cable.
6GB
Peaking Color (NEX-VG10/VG10E
only)
Sets the color used for the peaking function in manual focus.
1 MENU t [Setup] t [Peaking Color] t desired setting.
White
Red
Enhances outlines in white.
Enhances outlines in red.
Enhances outlines in yellow.
Yellow
Note
•
This item cannot be set when [Peaking Level] is set to [Off].
7GB
|