WEARING THE EARPHONES
Three popular methods for wearing the earphones are illustrated below.
INSERTING THE EARPHONES
E4c
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
Sound Isolating Earphones
The E4c earphone features High-
Definition drivers with Tuned-Port
technology for an ultra-wide frequency
soundstage with brilliant
highs and extended bass.
As the ideal companion
Warning: Do not push the earphone sleeve beyond the ear canal opening.
to any portable or home
audio source, the E4c
incorporates the same
�
right ear
left ear
precision components
used by professional
musicians to bring
incredibly accurate sound
with remarkable isolation.
Over the ear
in back
Over the ear
in front
Straight down
Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.
Tighten the cable and take up slack by raising the cable sleeve .
©2005, Shure Incorporated
27EN3189B (Rev. 4)
Printed in U.S.A.
CHOOSING AN EARPHONE SLEEVE
CLEANING THE EARPHONE NOZZLE
FULL TWO YEAR WARRANTY
Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.
If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.
Shure Incorporated (“Shure”) hereby warrants that this product will be free
from defects in materials and workmanship for a period of two years from
the date of purchase. At its option Shure will repair or replace the defective
product and promptly return it to you, or refund the purchase price. You should
retain proof of purchase to validate the purchase date and return it with any
warranty claim.
Wax Removal Loop
Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.
If you believe this product is defective within the warranty period, carefully
repack the unit, insure it, and return it postage prepaid to:
Nozzle
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Shure Incorporated
5800 W. Touhy Ave.
Niles, IL 60714-4608
When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound filter.
Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.
If necessary, the supplied replacement nozzles may be used. See the back of
this guide for instructions on nozzle replacement.
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
|